Summer Semester 2009

Bachelor- and Master Seminars

In preparation for your bachelor- or master thesis we offer bachelor- and master seminars. These seminars do combine the preparation of a special research topic incl. structured literature research and state-of-the-art analysis with learning the documentation and presentation skills needed in every industrial or academic job.

Bachelor- and master seminars are recommended or even mandatory in various study programs and will be dimensioned and credited appropriately. You will have to participate in regular meetings (biweekly during the semester, monthly during lecture free periods) and present your results to your peers.

Prerequisites: Bachelor- and master seminars are directly related to the prospective bachelor- resp. master thesis and therefore do require that you have all necessary requirements for starting the respective thesis. In addition you must have been donated a thesis topic by the telecommunications lab. Matlab experience, hearing or having heard Telecommunications 1 (+ Telecommunications 2 in case of master seminar) is strongly recommended.

 

Programmieren für Ingenieure (PfI)

Der überwiegende Teil der Ingenieursarbeit besteht aus “Software” im weitesten Sinne. Schaltkreise werden in SW entwickelt (simuliert und anschließend synthetisiert), Schaltungen in SW erstellt (computer-unterstütztes Layout und automatische Bestückung) und Endgeräte (Mobiltelefone, PCs/Notebooks, Settop-Boxen) nutzen oft weltweit einheitliche Schaltkreise und unterscheiden sich in der Cleverness der Systemsoftware.

Die Vorlesung PfI bietet einen Einstieg für Ingenieure in das Programmieren an sich und die Programmiersprache C++ im Besonderen. Neben den notwendigen Werkzeugen (Editor, Compiler, Linker, Librarian, Debugger, Make, Revision Control, integrierte Entwicklungsumgebung) wird die Programmiersprache C++ aus Sicht der objektorientierten Programmierung vermittelt.

Im Laufe der Vorlesung werden anhand von Beispielen aus der Literatur die besonderen Eigenschaften der Programmiersprache C++ sowie der verwendeten Programmierumgebung demonstriert. Objektorientierte Programmierung in C++ wird an Hand dieser Beispiele vorgestellt und in Übungen sowie einem Übungsprojekt praktisch erlernt. Der Lehrstuhl Nachrichtentechnik stellt eine bootfähige DVD zur Verfügung, auf der alle für die Vorlesung benötigten Komponenten enthalten sind.

Voraussetzung: Da PfI im Nebenfach für Ingenieure angeboten wird, sind keine speziellen Vorkenntnisse notwendig. Wie bei allen Modulen ist eine solide Kenntnis in der Anwendung von PCs (Betriebssysteme, SW-Installation, Anwendungsprogramme etc.) unumgänglich. Erste Erfahrungen in der Programmierung (z. B. Makro-Programmierung in Visual Basic oder die “Programmierung” von HTML-Seiten) sind sehr wünschenswert.

Anmerkung: Für Studierende in Bachelor-Studiengängen, die nur 5 LP für diese Veranstaltung erfordern, wird eine freiwillige Zwischenklausur angeboten, nach deren Bestehen das Modul als bestanden mit 5 LP gewertet wird. Die verbleibenden 2,5 LP können jedoch auch in diesen Ordnungen als Punkte eingebracht werden, so dass dringend empfohlen wird, das Modul vollständig zu absolvieren.

Zugang zu den Vorlesungsunterlagen und weiterführende Informationen erhält jeder Student per Email, nachdem er sich in der Electronic course registration der Lehrstuhl angemeldet hat.

 

Main Seminar: “Internet Protocols”

Traditionally our seminars cover “Digital Data Transmission” in a broad sense. Each semester, however, we focus on a certain aspect out of the variety of ingredients modern data transmission systems have to comprise. This semester Internet Protocols will be the focus of our seminar.After introducing typical standardisation paths (W3C, IETF, IEEE) we will focus on media-relevant Internet Protocols. Characteristics of IPv6, new transport protocols like SCTP or DCCP, add-ons to existing protocols like RTP (those add-ons comprise error correction, video profiles etc.) and media-related developments of the higher layers (e. g. MPEG-4 SVC).

 

Advanced lecture: Telecommunications II / “Audio/Visual Communications & Networks” (TC-II)(Nachrichtentechnik II / Digitale Kommunikationsnetze)

Remark: The course will be given in English in case this will be recommended by the participants in the first lesson.

Audio/Visual Communications & Networks will deepen your knowledge on modern communications systems. It will focus on wireless systems since from a telecommunications perspective the combination of audio/visual data – meaning inherently high data rate and putting high requirements on the realtime capabilities of the underlying network – and wireless transmission – that is unreliable and highly dynamic with respect to the channel characteristics and its capacity – is the most demanding application domain.

The lecture will build on the foundation layed as well in “Signals and Systems / Signale und Systeme” as in “Digital Transmission and Signal Processing / Digitale Übertragungstechnik und Signalverarbeitung” and it will apply the building blocks introduced there onto the various communications systems. The course will aim at being self-contained, however, it will not be able to repeat basic mathematical concepts and tools introduced in Telecommunications I.

As the basic principle the course will study and introduce the building blocks of wireless communication systems. Multiple access schemes like TDMA, FDMA, CDMA and SDMA are introduced, antennas and propagation incl. link budget calculations are dealt with and more advanced channel models like MIMO are investigated. Modulation and error correction technologies presented in Telecommunications I will be expanded by e.g. turbo coding and receiver architectures like RAKE and BLAST will be introduced. A noticable portion of the lecture will present existing and future wireless networks and their extensions for audio/visual data. Examples include 802.11 (with the TGe Quality of Service extensions), 802.16a and the terrestrial DVB system (DVB-T, DVB-H).

Required Education: “Audio/Visual Communications & Networks” is a course during the main study period and by such requires a solid foundation of mathematics (differential and integral calculus) and probability theory. The course will build on the mathematical concepts and tools tought in Telecommunications I while trying to enable everyone to follow and to fill gaps by an accelerated study of the accompanying literature. “Signals and Systems” as well as “Digital Transmission and Signal Processing” are strongly recommended but not required.